manualshive.com logo in svg

D-Link 3010F - DES Switch, Web User Manual

The D-Link 3010F - DES Switch offers exceptional performance and efficiency for your networking needs. With its advanced features and high-speed connectivity, this switch is a must-have for businesses and individuals alike. Enhance your network management experience by downloading the free Web User Manual from manualshive.com to maximize the full potential of this product.

Share
Download
background image

Configuring VLANs

Page 107 

Section 9. Configuring VLANs

VLANs are logical subgroups with a Local Area Network (LAN) which combine user stations and network devices 
into a single unit, regardless of the physical LAN segment to which they are attached. VLANs allow network traffic 
to flow more efficiently within subgroups. VLANs use software to reduce the amount of time it takes for network 
changes, additions, and moves to be implemented.

VLANs have no minimum number of ports, and can be created per unit, per device, or through any other logical 
connection combination, since they are software-based and not defined by physical attributes.

VLANs function at Layer 2. Since VLANs isolate traffic within the VLAN, a Layer 3 router working at a protocol 
level is required to allow traffic flow between VLANs. Layer 3 routers identify segments and coordinate with 
VLANs. VLANs are Broadcast and Multicast domains. Broadcast and Multicast traffic is transmitted only in the 
VLAN in which the traffic is generated.

VLAN tagging provides a method of transferring VLAN information between VLAN groups. VLAN tagging attaches 
a 4-byte tag to packet headers. The VLAN tag indicates to which VLAN the packets belong. VLAN tags are 
attached to the VLAN by either the end station or the network device. VLAN tags also contain VLAN network prior-
ity information.

Combining VLANs and GARP (Generic Attribute Registration Protocol) allows network managers to define net-
work nodes into Broadcast domains. 

This section contains the following topics: 

•

Defining VLAN Properties

•

Defining VLAN Membership

•

Defining VLAN Interface Settings

•

Defining Private VLANs

•

Configuring GARP

Summary of Contents for 3010F - DES Switch


























































































































































































































































































Reviews:

No comments

Related manuals for 3010F - DES Switch

3Com Baseline 2226 Plus Datasheet preview
Baseline 2226 Plus
Brand: 3Com Pages: 4
i3 International S244 Quick Start Manual preview
S244
Brand: i3 International Pages: 2
eao 04 Series Assembly Instructions preview
04 Series
Brand: eao Pages: 2
eao 04 Series Assembly Instruction preview
04 Series
Brand: eao Pages: 2
Raritan IP-Reach IPR-M1 Specifications preview
IP-Reach IPR-M1
Brand: Raritan Pages: 4
REV Ritter RF102R Assembly And Operating Instructions Manual preview
RF102R
Brand: REV Ritter Pages: 15
LEGRAND Raritan Dominion LX II Quick Setup Manual preview
Raritan Dominion LX II
Brand: LEGRAND Pages: 7
Datavideo SE-2200 Instruction Manual preview
SE-2200
Brand: Datavideo Pages: 38
Gomax MA-5288V2 User Manual preview
MA-5288V2
Brand: Gomax Pages: 24
SMC Networks ZSE1 Series User Manual preview
ZSE1 Series
Brand: SMC Networks Pages: 6
Good Way USB 2-to-6 User Manual preview
USB 2-to-6
Brand: Good Way Pages: 13
Linksys EG008W - Instant Gigabit Workgroup Switch User Manual preview
EG008W - Instant Gigabit Workgroup Switch
Brand: Linksys Pages: 27
e+p HDMS 33 Instruction Manual preview
HDMS 33
Brand: e+p Pages: 2
DataParts DAP-SW1004 User Manual preview
DAP-SW1004
Brand: DataParts Pages: 4
Pliant CrewCom CHB-8C Operating Manual preview
CrewCom CHB-8C
Brand: Pliant Pages: 49
Kramer 88DS Specifications preview
88DS
Brand: Kramer Pages: 2
G&D DP1.2-MUX2-NT Installation And Operation Manual preview
DP1.2-MUX2-NT
Brand: G&D Pages: 76
Larson Electronics MPD-DS-WML-NFDS Series Instruction Manual preview
MPD-DS-WML-NFDS Series
Brand: Larson Electronics Pages: 2

Brands by name

Popular brands

Load more brands