manualshive.com logo in svg

D-Link 3010F - DES Switch, Web User Manual

The D-Link 3010F - DES Switch offers exceptional performance and efficiency for your networking needs. With its advanced features and high-speed connectivity, this switch is a must-have for businesses and individuals alike. Enhance your network management experience by downloading the free Web User Manual from manualshive.com to maximize the full potential of this product.

Share
Download
background image

D-Link DES-3010FA/GA User Guide

Page 194 

File Management Overview

The configuration file structure consists of the following configuration files:

•

Startup Configuration File

 — Contains the commands required to reconfigure the device to the same set-

tings as when the device is powered down or rebooted. The Startup file is created by copying the configura-
tion commands from the Running Configuration file or the Backup Configuration file.

•

Running Configuration File

 — Contains all configuration file commands, as well as all commands entered 

during the current session. After the device is powered down or rebooted, all commands stored in the Run-
ning Configuration file are lost. During the startup process, all commands in the Startup file are copied to the 
Running Configuration File and applied to the device. During the session, all new commands entered are 
added to the commands existing in the Running Configuration file. Commands are not overwritten. To update 
the Startup file, before powering down the device, the Running Configuration file must be copied to the Star-
tup Configuration file. The next time the device is restarted, the commands are copied back into the Running 
Configuration file from the Startup Configuration file.

•

Image files

 — Software upgrades are used when a new version file is downloaded. The file is checked for 

the right format, and that it is complete. After a successful download, the new version is marked, and is used 
after the device is reset.

Summary of Contents for 3010F - DES Switch


























































































































































































































































































Reviews:

No comments

Related manuals for 3010F - DES Switch

D-Link D DGS-3048 DGS-3048 Datasheet preview
D DGS-3048 DGS-3048
Brand: D-Link Pages: 3
OEZ PS-LT Instructions For Use preview
PS-LT
Brand: OEZ Pages: 5
N-Tron NT24k User Manual preview
NT24k
Brand: N-Tron Pages: 132
Imtex-Controls SLR Series Installation & Adjusting Instructions preview
SLR Series
Brand: Imtex-Controls Pages: 2
Xunison Hub D60 5G Quick Start Manual preview
Hub D60 5G
Brand: Xunison Pages: 14
Eaton RMQ-Titan M22-LED Series Instruction Leaflet preview
RMQ-Titan M22-LED Series
Brand: Eaton Pages: 4
Microsens MS650850M Application preview
MS650850M
Brand: Microsens Pages: 8
Maiwe MIEN1203-F User Manual preview
MIEN1203-F
Brand: Maiwe Pages: 5
Vagner Pool PRO PIEZO 1 Instruction Manual preview
PRO PIEZO 1
Brand: Vagner Pool Pages: 5
ATEN VS-201 User Manual preview
VS-201
Brand: ATEN Pages: 9
DANLERS ControlZAPP CZ CEFL 10VDC Installation Notes preview
ControlZAPP CZ CEFL 10VDC
Brand: DANLERS Pages: 2
Pakedge Device & Software SE-8P4 User Manual preview
SE-8P4
Brand: Pakedge Device & Software Pages: 8
Unifore POE4100P User Manual preview
POE4100P
Brand: Unifore Pages: 8
Xantech 686-10 Installation Instructions preview
686-10
Brand: Xantech Pages: 5
KanexPro MX-HDBASE6X6-4K Manual preview
MX-HDBASE6X6-4K
Brand: KanexPro Pages: 42
Veris Industries Hawkeye 738 Installation Manual preview
Hawkeye 738
Brand: Veris Industries Pages: 2
United Integrated Services WPW-220 Installation Instructions Manual preview
WPW-220
Brand: United Integrated Services Pages: 6
Panduit ATLONA AT-HDR-SW-51 Manual preview
ATLONA AT-HDR-SW-51
Brand: Panduit Pages: 58

Brands by name

Popular brands

Load more brands