CST/BERGER CST202, Instruction Manual

Page: 88 / 117

21.2 Recording angle measurement data
Angle measurement data can be stored in the current job. Again, it may be
convenient to use
【
ALL
】
function to perform the measurement and recording function.
The content of record include vertical angle, horizontal angle, point name, code and
height of the target as detailed in the earlier section.
Operating Keys Display
8.
Check the input items, then press
【
OK
】
to store the measurement data in the
REC/Dist. Data
current job file and return to the step 1.
【OK】
S 103.126m
ZA 101°19′37″
HAR 350°43′20″
ALL MODE OFS MEAS
z
Press
【
ALL
】
to perform distance measurement and automatically record the results.
In this case, the point number is the last point number add one, the code and target height remain
the same. When the measurement results recording finished, the results will be displayed for two
seconds, then the screen of step 1 is restored.
z When
【
OFS
】
is pressed, offset measurement
（
distance offset
、
angle offset
）
can be performed.
（
Please see“14.Offset measurement”
）
.
Operating Keys Display
1. In the second page of Meas mode, press
【
REC
】
to come in the record mode.
REC/Dist.data
S
【REC】
ZA 101°19′37″
HAR 350°43′20″
ALL MODE OFS MEAS
2
．
Press
【
MODE
】
to change mode to
REC/Angle data
recording angle data mode.
S
ZA 101°19′37″ Press
【
0SET
】
to set the horizontal
【
MODE
】
HAR 350°43′20″
angle to 0.
ALL MODE 0SET MEAS
83