CST/BERGER CST202, Instruction Manual

Page: 28 / 117

Display
Operating Keys
4
．
Sight the target point 1 again, and press
【
OK
】
.
HARp
：
30°00 ′ 00 ″
Reps
：
1
Avg
：
30°00 ′ 00 ″
【
OK
】
Take 1st target
CE OK
5
．
Sight the target point 2 again, press
【
OK
】
The added value of the horizontal
HARp
：
60°00 ′ 02 ″
angle is displayed on the first line
Reps
：
2
“HARp” and the average value of the
Avg
：
30°00 ′ 01 ″
【
OK
】
horizontal angle is displayed on the
Take 2nd target
third line “AVG”.
CE OK
6
．
Repeat the step 4 to 5, and continue the
measurement process.
7
．
When the measurement is completed,
【
ESC
】
press
【
ESC
】
.
z
Pressing
【
REP
】
in the Meas mode performs the same function. Please see “22.3.1 defining
softkeys”.
z
Press
【
CE
】
to cancel last measurement and redo it.
z
The maximum number of angle measurements that can be made is 10.
10.6 Outputting angle measurement data
1. Connect the total station to a computer.
2. Define
【
SEND
】
in the Meas mode
（
Please see “22.3.1 defining softkeys”
），
and set
the communication baud rate
（
Please see “22.2 instrument configuration”
）
.
3. Sight the target point.
4. Press
【
Send
】
to output the observed data to the computer.
23