12
．
COORDINATE MEASUREMENT
Using the coordinate measurement application will enable the user to determine the
3-dimensional coordinates of a target position based on the Inst. Stn., Inst. Hgt., Tgt.
Hgt., and back sight data.
EDM setting should be done before coordinate measurement.
（
Please see “11.1 EDM settings”
）
.
12.1 Inputting instrument station coordinates
•
Ensure that the instrument station, back sight station or angles are set prior to
taking any measurements.
•
To accurately determine Heights, make sure that the Instrument Height and Target
Height are also set prior to taking any measurements.
29
Summary of Contents for CST202
Page 1: ...CST202 CST205 INSTRUCTION MANUAL Electronic Total Station...
Page 117: ......
