CST/BERGER CST202, Instruction Manual

Page: 23 / 117

10.2 Setting the horizontal angle to a required value
1.You can reset the horizontal angle to a required value and use this value to find the
horizontal angle of a new target.
Operating Keys Display
1. Sight the first target and then press
the 【
HSET
】 in the first page of the
Set H angle
Meas Mode Screen. The screen pictured
HAR
：
120.0912
to the right will appear.
【
HSET
】
BS
2. From this screen, enter in the angle you
wish to use as a reference. In this case,
MEAS
use 120.0912 …Please note the use of
H
the decimal. Once complete,
ZA 99°43 ′ 13 ″
【 】
press
【 】
. See display at right.
HAR 120°09 ′ 12 ″ P1
DIST SHV HSET EDM
3. Sight the second target. The
horizontal angle from the second
MEAS
target to the value set as the horizontal
H
angle is displayed.
ZA 99°43 ′ 13 ″
HAR 140°20 ′ 10 ″ P1
DIST SHV HSET EDM
z
Calculating the azimuth
：
Press
【
BS
】
.See “12.2 Azimuth angle setting ”
18