CST/BERGER CST202, Instruction Manual

Page: 101 / 117

3
．
Select “1. Tilt offset” and press
【 】
Tilt offset
to start adjustment.
z
Pressing
【
0SET
】
can set horizontal angle
to 0.
【 】
TILT -43
HAR 350°19′22″
<Step1> Take F1？
CE 0SET OK
4. Sight the target point in Face 1. Wait for the
display of tilt value to stabilize, and then
press
【
OK
】
.
z
Press
【
CE
】
to cancel the last operation
and redo it.
【OK】
TILT offset
TILT 25
HAR 170°19′26″
<Step2> Take F2？
CE 0SET OK
5. Loosen the horizontal clamp, rotate the top
of the instrument through 180°, and then
sight the same target in Face 2. Wait for the
display of tilt value to stabilize, and then
press
【
OK
】
. If there’s no error in operation,
the new offset value of tilt zero is displayed.
Tilt offset
Offset： -9
Set？
【OK】
CE OK
6
．
Press
【
OK
】
to accept the new value for
correction and return to <Instr. ADJ>
Instr. ADJ
Menu.
1.Tilt offset
【OK】
z
Press
【
CE
】
to discard the value and
repeat the procedures mentioned above.
2.V0 & Coll. crn
3.Instr. const
7. Press
【
ESC
】
to return to the Meas mode
and the new correction constant is in effect.
【ESC】
MEAS
H
ZA 99°43′13″
HAR 350°19′23″ P1
DIST SHV HSET EDM
96