Operating
Keys
Display
1
．
Press
【
LINE
】
in the Meas mode to enter
the menu mode come in <S-O LINE>
S-O LINE
menu.
1.Def.base line
Select “4. Stn.data” to input the
2.Point
instrument station data. Select “5.Stn.
3.Line
orient” to set the azimuth angle. Select
↓4.Stn.data
【LINE】
“6.Ins.h&Tgt.h”to input the instrument
height and the prism height.
（
Please see
“12.1 Inputting instrument station
coordinate”, “12.2 Azimuth angle setting”,
“12.3 inputting the height of instrument
and prism”
）
.
2. Press
【
】
to select “Def. baseline”.
Input the coordinate of the baseline
Baseline origin
starting point.
N<m>:
0.000
z
To recall the coordinate data registered in the
memory, press
【
READ
】
.
（
Please see “12.1.2
Reading in registered coordinate data”
）
.
E<m>:
0.000
Z<m>:
0.000
【
】
z
Press
【
REC
】
to record the coordinate data in
the memory.
READ
REC
OK
3. Press
【
OK
】
after inputting the data, then
input the azimuth and the grade of the
【Baseline direc.】
baseline. Press
【
OK
】
to finish the
Direc：
0.0000
definition of baseline.
Slope： 0.0000﹪
z
When
【
PT2
】
is pressed
，
the azimuth and
the grade of the baseline can be calculated
by inputting the coordinate of the second
point at the baseline.
【OK】
PT2
OK
64
Summary of Contents for CST202
Page 1: ...CST202 CST205 INSTRUCTION MANUAL Electronic Total Station...
Page 117: ......
