CST/BERGER CST202, Instruction Manual

Page: 80 / 117

20.2.2 Inputting coordinate of known point from an external equipment
By running TS communication software on a PC, coordinate data of known points can
be entered and edited, and then sent to the total station. Before the attempting
communication, set the communication parameters following the communication
protocols.
Keys Display Operating
1. Connect the total station and computer.
Run TS-link communication software
on PC.
2
．
Select “2.Known data” in the memory
mode and press
【 】
.
【 】
【 】
【 】
KNOWN DATA
1.Key in coord.
2.Comms input
3.List
4.Del all
3. Select “2.Comms input” and press
【 】
.known point coordinate data
Known data
starts to be transferred from PC and the
number of received items is displayed on
the screen.
Transferring…
z
Press
【
STOP
】
to stop data reception in
progress.
【 】
Received： 45
【 】
【 】
STOP
75