Display
Operating
Keys
3. Input the coordinates of the backsight
point and press
【
OK
】
.
Set H angle/BS
z
When you wish to read in and set
coordinate data from memory, press
【
READ
】
.
（
Please see “12.1.2
Reading in registered coordinate
data”
）
.
N<m>: 248.695
E<m>:
176.254
Z<m>:
12.3 Inputting the height of instrument and target
If you wish to measure the Z coordinate
，
the height of the prism and the instrument
must be entered.
z
Press
【
STN
】
to input the
coordinates of the instrument
station .See“12.1 Inputting
instrument station coordinate”
【OK】
READ
STN
OK
4. Calculated azimuth angle is displayed.
Sight the backsight point and press
【
YES
】
to complete setting and return
to <COORD> menu.
Set H angle/BS
H angle: 99°43′13″
【YES】
Take backsight?
NO
YES
Operating
Keys
Display
1. Select “4. Ins.h & Tgt.h” in <COORD>
menu, and press
【
】
to come in the
screen of inputting the prism height
and instrument height.
COORD
In the third page of the Meas mode,
press
【
HT
】
to perform the same
function.
【
】
【
】
【
1.Observation
2.Stn. data
】
3.Stn. orient
4.Ins.h&Tgt.h
2. Input the height of the prism and the
instrument, press
【
OK
】
confirm the
data and return to <COORD> menu.
Ins.h & tgt.h
Tgt.h<m>：1.50
Ins.h<m>:
1.35
【OK】
OK
33
Summary of Contents for CST202
Page 1: ...CST202 CST205 INSTRUCTION MANUAL Electronic Total Station...
Page 117: ......
