CST/BERGER CST202, Instruction Manual

Page: 56 / 117

Operating Keys Display
2
．
Press
【
MLM
】
in the third page of the
MLM
Meas Mode to enter the missing line
Sop
Measurement mode.
Hop Obs.2nd target 【MLM】
z
Select “4. MLM” in the Menu Mode to
perform the same function.
Vop
OBS MOVE S/% MLM
3. Sight the second target and press
【
MLM
】
to begin observation. When
▼V
MLM
observation finished , the following
Sop 27.354m
values are displayed
：
Hop 20.354m
Sop: Slope distance of the starting
Vop 1.012m
position and 2nd target point .
Hop: Horizontal distance of the starting
【
MLM
】
OBS MOVE S/% MLM
position and 2nd target point.
Vop: Height difference of the starting
position and 2nd target point.
4. Press
【
S/%
】
.The distance between two
▼V
MLM
points is displayed as the gradient
Sop 48.755 %
between two points.
Press
【
S/%
】
again to return to display
the slope distance.
【S/%】
Hop 20.354m
Vop 1.012m
OBS MOVE S/% MLM
5. Sight the next target point and press
【
MLM
】
to observe it. Slope distance,
horizontal distance and height distance
▼V
between multiple points and the starting
MLM
point can be measured this way.
Sop 27.354m
z
Sight the starting point and press
【
OBS
】
to re-observe it.
Hop 20.354m
Vop 1.012m
z
When
【
MOVE
】
is pressed, the last
target measured becomes the new
starting position to perform MLM of the
next target.
OBS MOVE S/% MLM
51