background image

27

CONTACT CSI FOR MORE INFORMATION  |  CSIDESIGNS.COM  |  [email protected]  |  +1.417.831.1411

A .  GENERAL PROVISIONS: Central States Industrial Equipment & Service Inc . 

(the “Company”) warrants exclusively to the original purchaser (the “Custom-
er”) that equipment or parts thereof manufactured and sold by the Company 
will be free from defects in material and workmanship only, under normal 
use and service, for a period of one (1) year from the original shipment date .  
The Company shall not be liable for any loss of revenue or profit, loss by 
reason of plant shutdown, non-operation or increased cost of operation, 
loss of products or materials, or other special or consequential loss or 
damages resulting from any such warranted defects .  This warranty will not 
apply to any equipment or parts which has been subjected to accident, al-
teration, abuse, or misuse .  This warranty is in lieu of all other warranties .  All 
other warranties, both express or implied (including, but not limited to, the 
implied warranties of merchantability and fitness for a particular purpose) 
warranties are hereby excluded and waived .  The Company’s only obliga-
tion and liability shall be to fulfill the warranty specifically stated herein .  The 
Company will neither assume nor authorize any other person to assume for 
it any other obligation or liability in connection with the equipment or parts . 
In the event of a claim under this warranty, the Company’s sole and exclu-
sive liability for any warranted equipment or parts shall be, at the Company’s 
option, limited to the following (a) the purchase price of the equipment or 
parts that are defective, (b) replacement of the defective equipment or parts 
or (c) repair of the defective equipment or parts .

B .  RETURN OF PARTS OR EQUIPMENT TO COMPANY PLANT: In the event the 

Company elects to inspect the alleged defective equipment or parts for pos-
sible repair, Company will notify Customer in writing, and the equipment or 
parts must be returned with transportation cost prepaid by the Customer .  In 
the event the Company’s inspection confirms defective equipment or parts 
covered by this warranty, the Company shall have the option to select any of 
the remedies described in Section A above .  No transportation for returned 
or replaced items will be paid by the Company unless written approval for 
transportation charges is given by the Company .

C .   COMPONENTS  NOT  MANUFACTURED  BY  THE  COMPANY:  Components  

not manufactured by the Company, but furnished as part of its equipment 
(for example: valves, controls, gauges, electrical switches or instruments, 
etc .) will be warranted by the Company only to the extent of the component 
manufacturer’s warranty .

WARRANTY

Summary of Contents for COMPACT CIP





























Reviews: