15
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | +1.417.831.1411
OPERATOR
INTERFACE
SCREENS:
COMMANDS
SCREEN
WASH TYPES
Caustic Wash Phases:
Pre-Rinse, Caustic, Drain, Final-Rinse
Caustic Sanitizer Wash Phases:
Pre-Rinse, Caustic, Drain, Final-Rinse, Sani-
tizer
Caustic Acid Wash Phases:
Pre-Rinse, Caustic, Drain, Rinse, Acid, Drain,
Final-Rinse
Caustic Acid Sanitizer Wash Phases:
Pre-Rinse, Caustic, Drain, Rinse, Acid,
Drain, Final-Rinse, Sanitizer
Sanitizer Wash Phases:
Sanitizer
WASH COMMANDS
Start:
Starts the automated sequence of the selected wash type .
Hold:
When the system is running, the operator can put the system in a
Hold state to stop the active wash but maintain the current timers so the system
can restart from where it was paused without starting the sequence over .
Restart:
When the system is in the Held position the operator can resume
the current wash from where they left off .
Abort:
Shuts down the system, canceling the active wash and putting the
system into an Idle state . This may also happen if a High Limit Alarm goes active
or an operator presses the E-Stop button on the control panel .
