4
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | +1.417.831.1411
INTRODUCTION
Thank you for purchasing a Compact CIP Product!
This manual contains operation instructions for the Compact CIP Control System .
ABOUT THIS MANUAL
This manual covers the complete line of Compact CIP systems . All Compact
CIP systems are available with optional equipment that can provide additional
functionality .
Please contact
CSI at 800.721.2394 or 417.831.1411
for assistance .
APPLICATION
CSI’s Compact CIP regulates the operation of your Clean-in-Place system .
Compact CIP takes the guesswork out of configuring and selecting the start,
stop, flow, temperature, and chemical concentration required for a successful
clean-in-place cycle . If used properly, your Compact CIP system can be a
source of savings and a vital step in ensuring product quality through rapid and
effective cleaning .
TECHNICAL DATA
• Compressed air pressure: 90–100 psig (requires at least 90, no more than 100)
• Air inlet size: 1/2” FNPT
• Maximum product pressure: 145 psig
• Product Temperature range: 0°F–180°F
• Electrical Requirement: AC 480V, 60Hz +/- 6%
• Amperage requirement based on system configuration: 20Amps without
electric heat, 57 Amps with electric heater option .
