11
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | +1.417.831.1411
OPERATOR
INTERFACE
SCREENS:
CONFIG
SCREEN
Note:
When a Flow SP of 50 .0 is entered on the Config screen, the pump flow
control will actually try to achieve and maintain 55 gpm to ensure that the flow is
always above the minimum target (or SP) .
Note:
Temperature is controlled in a similar way . When a Temp SP of 160 is
entered on the Config screen, the heat exchanger will actually try to achieve
and maintain 165ºF to ensure that the temperature is always above the minimum
target (or SP) .
Note:
Most sanitizers used in the sanitary industry don’t have a good conductiv-
ity profile, so typical operation of this system is to dose the desired amount of
sanitizer in the tank at the beginning of a Sanitizer wash phase .
