![background image](http://html1.mh-extra.com/html/crary/cws-case-ih-2162/cws-case-ih-2162_owners-manual-and-parts-manual_2679353020.webp)
PN 50887-00
Case IH 2162/MacDon FD1, FD70, FD75 Crary Wind System Owner’s/Parts
12
ASSEMBLY
4.1 GEARBOX/FAN MOUNT (FD70 , FD75 & CIH 2162 HEADERS)
1. Mark and drill a 21/32” diameter clearance hole for
gearbox mount in head. Measure 8.125” from the
vertical beam (Figure 5). The hole should be placed
as close as possible to oil reservoir.
2. Attach the gearbox mount weldment to the adapter
tube using the mount plate and bolts as shown in Figure
8 using four 5/8” x 7” long bolts and nylock nuts and
torque to 150 ft. lbs.
3. Install the upper support bracket to the gearbox mount
using two 3/8 x 1-1/4” carriage bolts and flange nuts.
Align the lower support bracket with the square hole on
the header adapter and secure with a 1/2” bolt. Tighten
all hardware (Figure 6).
4. Connect the upper and lower support brackets using
3/8 x 1-1/4” carriage bolts and nylock nuts (Figure 6).
5. Use a jack or hoist to position the gearbox in place next
to the gearbox mount weldment. Attach the gearbox to
the weldment with six 1/2” x 1-1/4” flange bolts. Torque
hardware to 75 ft-lbs.
6. Attach the PTO holder to the gearbox mount using two
3/8” x 1-1/4” carriage bolts and nuts (Figure 8).
7. Check the gearbox and, if necessary, fill the gearbox
with lube before use.
Use Mobilube SHC 75W-90 synthetic gear lube or
equivalent with the following specifications:
API Service GL-5/MT.1
MIL-L-2105D
MACK GO-J PLUS
SAE J2360
Capacity: 28 ounces (0.8 liters)
NOTE
Apply a medium strength thread locking agent to the bolts
used to secure the gearbox mount to the header and the
gearbox to the mount.
Figure 4: Gearbox mount location, Series II
Figure 5: Gearbox mount location, Series II
Figure 6: Support bracket Series II
NOTE
If you are installing a dual fl ow system install the tube
mount bracket shown in Figure 7 at this time. The bracket
can be found in the dual fl ow kit.
ATTENTION
For Hillco applications, please refer to the supplemental
installation manual supplied with your drive line.
Summary of Contents for CWS CASE IH 2162
Page 8: ...PN 50887 00 Case IH 2162 MacDon FD1 FD70 FD75 Crary Wind System Owner s Parts viii ...
Page 17: ...PN 50887 00 Case IH 2162 MacDon FD1 FD70 FD75 Crary Wind System Owner s Parts 9 ...
Page 58: ...PN 50887 00 Case IH 2162 MacDon FD1 FD70 FD75 Crary Wind System Owner s Parts 50 PARTS ...
Page 91: ......