PN 50887-00
Case IH 2162/MacDon FD1, FD70, FD75 Crary Wind System Owner’s/Parts
6
SAFETY
1. Make sure you are in compliance with all local regula-
tions regarding transporting equipment on public roads
and highways.
2. It is the responsibility of the owner to know the lighting
and marking requirements of the local highway authori-
ties and to install and maintain the equipment to provide
compliance with the regulations. Add extra lights when
transporting at night or during periods of limited visibility.
3. See the Owner’s manual that came with your combine
and header for proper transportation.
1. Keep safety decals clean and legible at all times.
2. Replace safety decals that are missing or have become
illegible.
3. Replaced parts that displayed a safety decal should
also display the current decal.
4. Replacement decals are to be placed back in the origi-
nal location.
5. Safety decals are available from your authorized dealer
or the factory.
HOW TO INSTALL SAFETY DECALS:
1. Be sure that the installation area is clean and dry.
2. Be sure temperature is above 50°F (10°C).
3. Decide on the exact position before you remove the
backing paper.
4. Remove the smaller portion of the split backing paper.
5. Align the decal over the specified area and carefully
press the small portion with the exposed sticky back-
ing in place.
6. Slowly peel back the remaining paper and carefully
smooth the remaining portion of the decal in place.
7. Small air pockets can be pierced with a pin and
smoothed out using the piece of decal backing paper.
Think SAFETY! Work SAFELY!
2.7 TRANSPORT SAFETY
2.10 SAFETY DECALS
2.8 STORAGE SAFETY
2.9 ASSEMBLY SAFETY
1. Store the unit in an area away from human activity.
2. Do not permit children to play on or around the stored
machine.
3. See the Owner’s manual that came with your combine
and header for proper storage.
1. Assemble in an area with sufficient space to handle
the largest component and access to all sides of the
machine
2. Use only lifts, cranes and tools with sufficient capacity
for the load.
3. When necessary, have someone assist you.
4. Do not allow spectators in the working area.
Summary of Contents for CWS CASE IH 2162
Page 8: ...PN 50887 00 Case IH 2162 MacDon FD1 FD70 FD75 Crary Wind System Owner s Parts viii ...
Page 17: ...PN 50887 00 Case IH 2162 MacDon FD1 FD70 FD75 Crary Wind System Owner s Parts 9 ...
Page 58: ...PN 50887 00 Case IH 2162 MacDon FD1 FD70 FD75 Crary Wind System Owner s Parts 50 PARTS ...
Page 91: ......