Crary CWS CASE IH 2162, Owner'S Manual And Parts Manual, Page: 22 / 92

PN 50887-00 Case IH 2162/MacDon FD1, FD70, FD75 Crary Wind System Owner’s/Parts 14
ASSEMBLY
SERIES II
GEARBOX KIT
SCREW, 11/32 X 7/8
REAR TUBE
MOUNT
BOLT, 3/8 X 3/4
SERR FLANGE
PTO SHIELD
REMOVE FIELD TRANSPORT STORAGE
BRACKETS THAT WILL GET IN THE WAY
OF FLEXHOSE/ MANIFOLD.
C
A
B
D
3. Install the two tube mount weldments using two 11/32”
x 7/8” self-tapping screws.
4. Set the aluminum manifold on the rear tube mounts
on the back of the head.
5. Fasten the manifold to the tube mount weldment with
two 5/16” U-bolts and four nuts (Figure 42).
4.2 RIGHT HAND DRIVE KIT
Figure 9: FD1 and FD75 tube mount Diagram
1. Using three 3/8” x 3/4” bolts, install the PTO shield.
2. Using the table to the right, measure from the end of
the header. For proper orientation reference Figure 9 to
correctly postion FD1 and FD75 tube mount weldments.
Use the brackets as a template to mark and drill two
9/32” holes for each bracket.
Header
Length
“ A ”
First
Bracket
Mount
“ B ”
Second
Bracket
Mount
“ C ”
“ D ”
Manifold
Length
30’ 18” 38” 4” 28”
35’ 30” 73” 16” 65”
40’ 30” 95” 16” 94”
45’ 30” 110” 16” 120”
4.5”
NOTE
OEM Field transport tongue storage brackets may need
to be removed.
Figure 10: Right hand drive kit assembly