Covidien WarmTouch, Service Manual

Page: 159 / 314

Speaker Cable Replacement
Service Manual 10-41
To replace the speaker cable:
1.
Follow the procedure Separating the Front and Rear Enclosures on page 9-2.
2.
Disconnect the two speaker cable connections from the speaker terminal
(
Figure 10-30 ).
3.
On the Power PCBA, disconnect the speaker cable from the 2-pin P103 connector.
Figure 10-30. Speaker Cable Connections
4.
Connect the new speaker cable to the P103 connector on the Power PCBA. Make
sure the connector latch engages.
5.
Connect the speaker cable to the speaker:
•
Red wire to the positive (+) terminal
•
Black wire to the negative (–) terminal
6.
Follow the procedure Rejoining the Front and Rear Enclosures on page 9-5.
1 Positive (+) Terminal
(Red Wire) 3 Negative (–) Terminal
(Black Wire)
2 P103 Connection
(Power PCBA)