4.5 Get Object List
Click ‘Get Object List’ to get a list of all of the device’s currently known objects. Note
that the total object count contained in a ValuPoint is configurable. As shipped, the
ValuPoint defaults to having one object per I/O point and no additional objects.
Therefore if you were expecting to see the advertised 200 objects but only see a few,
this is to be expected until you allocate additional objects.
4.6 Clear Who-Is Cache
You normally have little use for this button. However, if you change the device’s
Object ID (device instance), you will need to return to this page, clear the cache, and
repeat the device selection process because the device’s identity has changed.
4.7. Read All Config
There is a shortcut available for reading the properties found on various pages when
getting a device in sync for the first time, usually after powering up the gateway. Click
Read All Config to do the equivalent of reading properties on other pages sufficient to
get all the red X’s to change to green checkmarks.
4. Who-Is
file:///C:/AAA_CSI/Literature/2016 User Guides/VP4-BACnet User Gui...
4 of 6
11/3/2016 10:40 AM
