6.6 Reinit Device
Click ‘Reinit Device’ to restart the ValuPoint using new settings to baud rate, MAC
address, or Max Master setting. You will need to enter the old password since the device
reinitialize is password protected. If you had entered a new password when you clicked
‘Change Info’, it will become effective after using the old password one last time to cause
the changes to take effect. NOTE: The default initial password is "valupoint".
If you have changed baud rate or other communications settings, you will most likely
need to completely restart the configuration tool, starting with disconnecting and
reconnecting on the Connect page.
6.7 File Read/Write (XML)
Click the ‘new’ icon to erase everything shown on the device page.
Click the ‘open file’ icon to read a device configuration from an XML file. If you will be
replicating the same device configuration multiple times, you will save time by creating a
file that can be reloaded. The currently open file will be indicated in the title bar of the
program.
Click the ‘save’ icon to re-save the previously opened file, or to save for the first time if
creating a new file. The presently displayed device configuration will be saved.
Page 4 of 5
6. Device Page
8/16/2017
mk:@MSITStore:C:\AAA_CSI\Literature\2016%20User%20Guides\VP4-BACnet%20Us...
