manualshive.com logo in svg

CONTROL SOLUTIONS ValuPoint 4, User Manual

Share
Download
CONTROL SOLUTIONS ValuPoint 4 User Manual Download Page 7

software bugs, technical inaccuracies, typographical errors, and the like. Changes are
periodically made to the information herein; these changes may be incorporated in
new editions of the software.

1.5       Required License Information

No licence is required for use of the ValuPoint configuration tool or programming
software. The only licence requirements are that the following notices are provided.

The ValuPoint configuration and line programming tools include the SmartWin library
(http://smartwinlib.org) under the following terms:

License agreement for S+ (BSD license)

Copyright (c) 2005, Thomas Hansen All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
* Neither the name of the S+ nor the names of its contributors may be used
to endorse or promote products derived from this software without specific prior
written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

i.CanDrawIt includes, licensed under LGPL, TinyCAD, Copyright 1994-2009 Matt Pyne.
Source code is available at http://tinycad.sourceforge.net. Open source products
included under either GPL or LGPL include TinyCAD v2.70; Unicode/Font
Conversions: iconv.dll version 1.9.0.0; PNG Image Support: libpng13.dll version
1.2.8.0; Image compression support: zlib1.dll version 1.2.1.0.

1. Overview

file:///C:/AAA_CSI/Literature/2016 User Guides/VP4-BACnet User Gui...

5 of 5

11/3/2016 10:39 AM

Summary of Contents for ValuPoint 4
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands