manualshive.com logo in svg

CONTROL SOLUTIONS ValuPoint 4, User Manual

Share
Download
CONTROL SOLUTIONS ValuPoint 4 User Manual Download Page 47

8.3       MS/TP BACnet Client Parameters

Map BACnet Object (check box) – Check this box when the ValuPoint should look for
another BACnet device as the slave device (instead of a Modbus slave). This box can
be checked any time, but is of particular interest when using the ValuPoint as a
Modbus slave and BACnet master for connecting BACnet devices to a Modbus network.

Remote Device Instance – Enter the device instance of the remote BACnet slave. The
remote device must be able to support Who-Is/I-Am for locating device by device
instance.

Object Type – Select the object type from the list, such as Analog Input, etc.

Mac address (no who-is) – Sets the MS/TP Mac address (station ID) if the slave device
does not support Who-Is and I-Am. Device instance will be used to automatically
capture the Mac address when Who-Is/I-Am is supported. This setting should be zero
to use Who-Is, or set to some non-zero Mac address if the slave does not support
Who-Is.

Property – Select the property to be read/written. A collection of most often used
property types are included in the drop list. If the desired property is not shown, select
‘Other-->’ and enter the property type code in the window next to the list. The
property type codes are those defined by the BACnet standard. For example, Present

8. Object Map Page

file:///C:/AAA_CSI/Literature/2016 User Guides/VP4-BACnet User Gui...

7 of 10

11/3/2016 10:42 AM

Summary of Contents for ValuPoint 4
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands