Continental Access CADV-H-SR08 EH-Series, User Manual

Page: 82 / 99

Digital Video Recorder
71
Highlight
Verify After Burning
and press the button. This will toggle between On and Off. When this
feature is On, you can verify that the data is written on the CD-RW or DVD RW properly.
Once you have given the video clip a file name, highlight the Start button and press the button. The
confirmation screen displaying data size will appear. When the storage device does not have enough
space, the DVR will ask if you want to copy as much of the video clip as possible in the available space.
Highlight the
Continue button and press the button to continue clip copy.
Once the clip copy starts, you can cancel it by selecting Cancel or hide the screen by selecting Close .
When selecting Close , Clip Copy continues and a confirmation screen will display when complete.
NOTE: Only 4.7GB DVD media is available. To clip copy video on the DVD media using remaining
space, the size of previously recorded data on the DVD media should be less than 4GB.
NOTE: The file size for clip copy is limited to 2GB.
You can use other functions on the DVR while video is being backed up. To do this, highlight the Close
button and press the button. You can return to the Clip-Copy screen at any time to check the progress.
Refer to Appendix B ─ Reviewing Clip Files for instructions on how to review video clips you have
copied.
NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or
format the storage device.
CAUTION: Do NOT disconnect the USB cable or the power from the external drive while
copying video clips. If the external drive is shut down or the USB cable is disconnected
while copying video clips, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE
EXTERNAL DRIVE COULD BE DAMAGED, and you will get an error message the next
time you try to copy video clips. You will need to power down the DVR and restart it to
get rid of the error message. Once the file system of the USB-IDE hard disk drive has
been corrupted, this error message cannot be dismissed. Even after restarting the DVR
it may automatically restart while preparing to clip copy. You must recover the file
system using the recovery program, or you must reformat the hard disk drive.