User’s Manual
34
Highlight the
Spot Monitor
tab to switch to the Spot Monitor screen.
Figure 46
─
Spot Monitor screen.
You can define which cameras display sequentially on the Spot Monitor. Highlight the box in the
Channels
column and press the button.
You can save your Display settings by highlighting
Save
and pressing the button. Selecting
Cancel
exits the screen without saving the changes.
Remote Control Screen
Highlight
Remote Control
in the Devices menu and press the button. The
Remote Control
setup
screen allows you to select a port and make correct settings for a remote keyboard.
Figure 47
─
Remote Control setup screen.
Highlight the box beside
Port
and select from None, RS232 and RS485. If the RS232 port and RS485
port are in use for PTZ control, networking or text input, the remote keyboard cannot be configured.
Highlight
Setup…
and select the correct Baud Rate, Parity, Data Bits and Stop Bits for the device you
are connecting to the DVR.
Summary of Contents for CADV-H-SR08 EH-Series
