User’s Manual
24
Highlight the box beside
ID
and press the button. A virtual keyboard appears allowing you to enter the
ID for ADSL connection.
Highlight the box beside
Password
and press the button. A virtual keyboard appears allowing you to
enter the password for ADSL connection.
NOTE: Entering the
ID
and
Password
and highlighting
OK
reads the current IP address of the DVR
configured by the ADSL network.
NOTE: If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might
change whenever the unit is turned on.
Modem Setup
Highlight the
Modem
tab, and the Modem screen displays.
Figure 30
─
Modem setup screen.
NOTE: If the RS232 port is in use for remote control, networking cannot be configured for a
modem.
Highlight
Enable
and press the button to toggle between On and Off. You will only be able to change
the settings if Modem is enabled.
Highlight the box beside
Baud Rate
and press the button. A list of baud rates ranging from 300 to
115,200 appears.
Highlight the box beside
Data Bit
and press the button. Choose between 7 bit and 8 bit formats.
Highlight the box beside
Stop Bit
and press the button. Choose between 1 and 2 Stop Bits.
Highlight the box beside
Parity
and press the button. A drop-down list appears. You can select from
None
,
Odd
or
Even
parity.
Summary of Contents for CADV-H-SR08 EH-Series
