Continental Access CADV-H-SR08 EH-Series, User Manual

Page: 38 / 99

Digital Video Recorder
27
Highlight the box beside Port and press the button. Use the arrow buttons to enter the SMTP Server
port number obtained from your system administrator. The default port number is 25.
Highlight Use SSL/TLS and press the button to toggle between On and Off. When it is On, the DVR
can send an email via an SMTP server requiring SSL (Secure Sockets Layer) authentication.
Highlight the box beside Authentication and press the button. An Authentication screen appears.
Highlight the box beside S
ender and enter the sender’s e-mail address. Use the virtual keyboard to enter
the e-mail address.
NOTE: The e-mail address must include the “@” character to be a valid address.
Highlight the box beside Recipient and enter the recipient’s e-mail address. Use the virtual keyboard to
enter the e-mail address.
Highlight the Callback tab, and the Callback screen displays.
Figure 34 ─ Notification Callback setup screen.
Highlight LAN and press the button to toggle between On and Off. When LAN is turned On you can
change the IP addresses.
Highlight the
IP Address
box that you want to change and press the button. Enter the IP address of
the computer you want contacted during an event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times you would like the DVR to try contacting
the computer. You can select from 1 to 10 retries.
If the modem was enabled in the Network screen, you can set up the DVR to contact a computer running
RAS. Highlight
Modem
and press the button to toggle between On and Off. When Modem is turned
On you can enter a telephone number.
Highlight Use and press the button to toggle between On and Off.
Highlight the box beside User / Password and press the button. A
virtual keyboard appears allowing you to enter the user ID and password.
Figure 33 ─ Authentication setup screen.