-
49
-
The diluted sodium hyoichlo from 500ppm(1:100 diluted bleaching agent) to 5000ppm (1:10 bleaching
agents) is very effective. The concentration of the diluted sodium hyocihlo depends on how many organisms
(blood, mucus) on the surface of the chassis to be cleaned.
1
．
Diluted Formaldehyde 35% -- 37%
2
．
Hydrogen Peroxide 3%
3
．
Alcohol
4
．
Isopropanol
The monitor and sensor surface can be cleaned with hospital-grade ethanol and dried in air or with crisp
and clean cloth.
Our company has no responsibility for the effectiveness of controlling infectious disease using these
chemical agents. Please contact infectious disease experts in your hospital for details.
10.4 Disinfection
To avoid long-term damage to the device, we suggest to disinfect the device only necessary during the
maintenance plan. And we suggest to clean the device first before disinfection.
Advised disinfection material: ethanol group, aldehyde group
Please refer to relative chapters for the disinfection of ECG lead, SpO2 sensor, NIBP cuff and TEMP probe.
Caution
Do not use EtO gas or formaldehyde to disinfect the monitor.
Dilute the disinfectant according to manufacture’s instruction or adopt the disinfectant with concentration
as low as possible.
Do not let any liquid ingress into the device.
Do not immerse any part of the device in any liquid.
During disinfection, do not pour any liquid on the device.
Do not leave any disinfectant on the surface of device, wipe it up immediately with a wet cloth.
