-
13
-
automatically save all the setups in the parameter menu, ECG gain and filter way as the user-defined default
configuration according to the patient type. Also, the dialog box as shown below will pop up.
Figure 3-5 Confirm Default Config
Note
After selecting any item in the DEFAULT menu and exiting the box, the “CONFIRM TO SAVE” Dialog
box will pop up, in which you can select [YES] to confirm your selection or [NO] to give up your selection.
Warning
All configurations in the system will be replaced by “default configurations”.
3.3 Recall
In the “SYSTEM MENU”, there are [TREND GRAPH], [TREND TABLE], [NIBP RECALL] and [ALARM RECALL]
items. Please refer to Chapter 7 Recall for detailed information.
3.4 System Setup
Select the [SYS SETUP] item in the [SYSTEM MENU]:
Figure 3-6 System Setup
In the [SYSTEM SETUP] menu, users can setup the following items.
