Comtech EF Data Vipersat CDD-562L, Installation And Operation Manual

Page: 226 / 254

CDD-562L/564 Demodulator with IP Module Revision 2
Appendix D MN/CDD564L.IOM
D–10
D.4.1 IP Commands and Queries
D.4.1.1 Admin Commands and Queries
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Access List Delete ACD=x 1-byte numerical
1…4
Command only.
Deletes the specified access list entry from the access list table in the form <1/ACD=x,
where x is value of 1…4 ACD=
ACD! N/A ACD=x [1..4]
(see Description of Arguments)
Access List
Enforcement ACE= 1 byte, value of
0 or 1 Command or Query.
Enables or disables access list enforcement, where:
0 = Disabled
1 = Enabled ACE =
ACE!
ACE? ACE=x
(see Description of Arguments)
Access Client List
ACL= 18 bytes,
numerical
Command or Query.
Sets the Access list entry, which contains a subnet and mask. Once access list is enabled,
only devices from the allowed ranges are allowed to communicate with the modem, in the
form xxx.xxx.xxx.xxx/yy, where:
xxx.xxx.xxx.xxx is the IP address, and yy is the network prefix (0-31)
Returns 000.000.000.000/32 when a particular Access Client is not configured.
Example: <1/ACL[1]=010.006.030.001.24 ACL =
ACL!
ACL? ACL=xxx.xxx.xxx.xxx.yy (see
Description of Arguments)
Administrator
Password ADP=
11 bytes
No spaces
allowed. Command or Query.
Changes the administrator password.
Example: ADP=comtech ADP =
ADP!
ADP?
ADP=xxxxxxxxxxx
(see Description of Arguments)
Administrator
UserName ADU=
11 bytes
No spaces
allowed. Command or Query.
Changes the administrator username.
Example: ADU=comtech
Note: To activate the new user name, ADP must be issued immediately after ADU. Then
query ADU? to see new value.
ADU =
ADU!
ADU?
ADU=xxxxxxxxxxx
(see Description of Arguments)
3xDES Decrypt Key DDK[1..8]= 48 bytes,
numerical Command or Query.
3xDES decrypt key, where all are HexadeCIMal digits. [0…F], a total of 48 Hex digits.
Example: DDK:0=222222222222222244444444444444446666666666666666 DDK =
DDK!
DDK[1..8]?
DDK=x [1..48]
(see Description of Arguments)
3xDES Encrypt Key DEK[1..8]= 48 bytes,
numerical Command or Query.
3xDES encrypt key [192-Bit], where all are HexadeCIMal digits. [0…F], a total of 48 Hex
digits.
Example: DEK[1]=222222222222222244444444444444446666666666666666 DEK =
DEK!
DEK[1..8]? DEK=x [1..48]
(see Description of Arguments)