CDD-562L/564 Demodulator with IP Module
Revision 2
Quick Start Guide
MN/CDD564L.IOM
7–7
7.3.2 Set CDM-IP Modems to Router Mode Operation
Perform the following steps on
Satellite Modems (CDM-IP) 1 and (CDM-IP) 2
:
Step Description
1
Beginning with the CDM-IP 1 modem:
From the CLI
Main Menu,
select the
Administration
[A]
submenu.
2
From the
Administration
submenu, select
CDM-IP Working Mode [C]
.
3
Select [
1
] for
Router Mode – Small Network Mode
.
When the following prompt is displayed:
Changing Modem working mode requires system Reboot.
Do you want to continue(Y/N)[Enter :No]
Confirm, when prompted, by typing
[y]
(yes).
4
Allow CDM-IP to reboot then, from the CLI
Main Menu
select
Interface Configuration
[ I ]
.
5
From the
Interface Configuration
submenu, select
Receive HDLC Channel Addresses [H]
.
6
From the
Receive HDLC Channel Addresses
submenu, select
[1]
for
HDLC Addr 1
.
When the following prompt is displayed:
Please enter a value for the HDLC Addr 1
Press ESC to abort
HDLC address [SMALL NETWORK] in hex <0x1 - 0xFE, enter = 0001>:
Enter
[1]
to set
HDLC Addr 1
to
0x01
.
HDLC Addr 1 will display as 0x0001, although only the last two digits are used in
Small Network Mode, allowing up to 254 separate HDLC addresses.
7
Continuing to the CDM-IP 2 modem:
For
CDM-IP 2
, repeat
Steps 1-6
–
except – for
Step 6,
set HDLC Addr 1 to
0x02
.
Summary of Contents for Vipersat CDD-562L
