Comtech EF Data Vipersat CDD-562L, Installation And Operation Manual

Page: 75 / 254

CDD-562L/564 Demodulator with IP Module Revision 2
Updating Firmware MN/CDD564L.IOM
5–5
Step Task
3
(cont)
C. Use Windows Command-line to create the temporary folder:
•
First, click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS-DOS Prompt
icon from the Main Menu).
•
Next, open a Command-line window…
o
For Windows 95 or Windows 98, type “ command ”.
o
For any Windows OS versions later than Windows 98, type “ cmd ” or
“ command ”.
o
Alternately, from [Start] , select All Programs > Accessories > Command
Prompt .
o
Finally, from the Command-line prompt ( c:\> ), type “ mkdir temp ” or “ md temp ”
( mkdir and md stand for make directory ), and then click [OK] .
D. Use the ‘ Run ’ and ‘ Browse ’ windows to create and rename the temporary folder.
•
Select [Start] on the Windows taskbar, and then click the Run... icon. The ‘ Run ’
window will open.
•
Click [Browse] in the ‘ Run ’ window. The ’ Browse ’ window will open.
•
Click the Create New Folder icon in the ‘ Browse ’ window. The new folder will be
created.
Right-click the “ New Folder ” folder name, and then rename this folder to “ temp ” or some
other convenient, unused name.
There should now be a "temp" folder created and available for placement of the firmware file
download.