Comtech EF Data Vipersat CDD-562L, Installation And Operation Manual

Page: 228 / 254

CDD-562L/564 Demodulator with IP Module Revision 2
Appendix D MN/CDD564L.IOM
D–12
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Ping Reply Enabled PRE= 1 byte, value of
0 or 1 Command or Query.
Enables or disables ping reply, where:
0 = Disabled
1 = Enabled
Note: When disabled, the modem will not respond to pings (network security feature) PRE =
PRE!
PRE? PRE=x
(see Description of Arguments)
Enable/Disable QoS
Feature QSE= 1 byte value
0 – Disable
1 – Enable Command or Query.
Sets the Quality of Service feature, where:
0 = Disabled
1 = Enabled
QSE=
QSE! QSE? QSE=x
RX Header
Compression
enable/disable RHE= 1 byte, value of
0, 1, 2 or 3 Command or Query.
Enables or disables the Transmit 3xDES feature, where,
0 = Disabled
1 = Enabled
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased
RHE =
RHE!
RHE? RHE =x
(see Description of Arguments)
ReadOnly
Password ROP= 11 bytes
No spaces
allowed.
Command or Query.
Changes the ReadOnly password.
Example: ROP =comtech
ROP =
ROP! ROP?
ROP=xxxxxxxxxxx
(see Description of Arguments)
ReadOnly
UserName ROU=
11 bytes
No spaces
allowed. Command or Query.
Changes the ReadOnly username.
Example: ROU=comtech
Note: To activate the new user name, ROP must be issued immediately after ROU.
ROU =
ROU!
ROU?
ROU=xxxxxxxxxx
(see Description of Arguments)
ReadWrite
Password RWP=
11 bytes
No spaces
allowed. Command or Query.
Changes the ReadWrite password.
Example: RWP=comtech
RWP =
RWP!
RWP?
RWP=xxxxxxxxxxx
(see Description of Arguments)
ReadWrite
UserName RWU=
11 bytes
No spaces
allowed. Command or Query.
Changes the ReadWrite username.
Example: RWU=comtech
Note: To activate the new user name, RWP must be issued immediately after RWU. RWU =
RWU!
RWU?
RWU=xxxxxxxxxxx
(see Description of Arguments)
System
Configuration Get None String of
Variable byte
size
Query only.
Querying SCG? dumps the system configuration. This can be used for updating the GUI
parameters. See the Appendix section for more information on individual field.
SCG=
SCG! SCG? SCG=string of variable byte
size.
SMTP Domain
Name SDM= 128 bytes,
characters, no
spaces
Command or Query.
SMTP Domain name of up to 128 characters.
Note: Entering an empty string will delete the domain name. To delete the domain name,
issue <1/SDM=
Example: SMTP=somedomainname
SDM =
SDM!
SDM? SDM=x [1..128]
(see Description of Arguments)