CDD-562L/564 Demodulator with IP Module
Revision 2
HTTP (Web Server) Interface
MN/CDD564L.IOM
9–28
•
Delete:
Once a Route Entry is entered into the
Name
field, click
Delete
to subsequently
remove the entry from the Route Table.
Click [
Submit]
to execute the entries to this section.
Route Table
This
read-only
window displays the current Route Table entries.
9.3.4.4 IP | Multicast
Use this page to manage multicast IP traffic over the satellite or to another device on the local
LAN.
Figure 9-21. IP | Multicast page
Multicast Route Table Entry
•
Name
: Assign a label for the Multicast Route Entry as a means to maintain the network. The
assigned name cannot contain any whitespace and must be unique.
•
Downlink Route All Available Multicast
(
read-only
): Displays the status of this feature as
Enabled
or
Disabled
.
•
Multicast IP Address
: This address defines the route to the destination network.
•
Next Hop HDLC (Eth to Sat Only) (read-only)
: Displays the desired Next Hop HDLC IP
Address for traffic to be sent over the satellite, within the following ranges:
o
Point-to-Point
– No HDLC address
Summary of Contents for Vipersat CDD-562L
