Comtech EF Data Vipersat CDD-562L, Installation And Operation Manual

Page: 110 / 254

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–6
Administration page
Access the Administration page from the Main Menu page .
p
This page contains the following unique selections/fields:
Selection Entry Description
Name/Password Configuration P Allows definition of the user name and passwords that are required
in order to access the management interfaces, like Telnet, SNMP,
HTTP.
Access Lists A Sets access restrictions to the management interfaces based upon
the requester’s IP address.
Feature Configuration F Opens the Feature Configuration page.
3xDES Configuration (Per Demod) D Determines if 3xDES encryption is enabled on a device and, if so,
the 3xDES keys that are used to decrypt traffic.
SMTP Configuration M Specifies appropriate settings for Simple Mail Transfer Protocol e-
mail server.
SNMP Configuration N Specifies management parameters for Simple Network
Management Protocol.
Working Mode C Selects the IP Module Working Mode. Note that only Router Mode
is supported:
1 -- Router – Small Network
2 -- Router – Large Network
3 -- Router – Point to Point
4 -- Router – Vipersat
5 -- Managed Switch
Access to the Administration page is restricted to the Admin user when
connecting via the Telnet, SNMP, or HTTP interface. The Administration page
is available when connected via the Terminal Emulator (serial) connection
because there is no login.