CDD-562L/564 Demodulator with IP Module
Revision 2
HTTP (Web Server) Interface
MN/CDD564L.IOM
9–33
9.3.4.7 IP | IGMP
Use this page to facilitate the use of IGMP (Internet Group Management Protocol) with
configured multicast routes.
Figure 9-24. IP | IGMP page
Demod as Server
•
Enable IGMP:
Use the drop-down list to select
Yes
or
No
. If enabled, the IP Module
responds to IGMP queries for the configured multicast routes on the transmit side and
generates IGMP queries on the receive side.
•
IGMP Query Period:
Enter a query period value – from
1
to
600
seconds – into the text box.
•
IGMP Maximum Response Time:
Enter a response time value that is
less than the IGMP
Query Period minus one
– from
1
to
598
seconds – into the text box.
•
Missed Responses before leaving IGMP Group:
Enter the number of desired missed
responses – from
1
to
30
– into the text box.
Click [
Submit]
to execute the entries made in this section.
IGMP Table
This
read-only
table lists the IGMP Groups that are active on the demodulator. This includes the
TTL (Time to Live) for the entry; the Client State (Idle, Active, or Closing); and the SRC and
Group Entries.
Summary of Contents for Vipersat CDD-562L
