TRP1000-4450 Troposcatter C-Band Outdoor Amplifier
Revision 0
Ethernet-based Remote Product Management
4–17
MN-TRP1000-OD
4.5.4.3.3
Config | Utility
Use this page to configure TRP1000-4450 operating parameters.
Figure 4-7. Config | Utility Page
Date and Time
Enter a date using international format in the form DD/MM/YY (where DD = day [01 to 31], MM
= month [01 to 12], and YY = year [00 to 99]).
Enter a time using HH:MM:SS format (where HH = hour [00 to 23], MM = minutes [00 to 59],
and SS = seconds [00 to 59]).
Click
[Change Date/Time]
once the desired date and time have been entered in this section.
Circuit ID
Enter a Circuit ID string of up to 48 characters. Click
[Save Changes]
once the desired string is
entered in this section.
Current Active Firmware Image (read-only)
The selected Current Active Firmware Image is identified here. In this example, Image 2 is the
Current Active Firmware Image.
Next Reboot Image
Use the drop-down list to select
Reboot Image
1
or
2
. Press
[Submit]
when done.
Perform Soft Reboot
Click [Reboot Now] to reboot the TRP1000-4450 using the Current Active Firmware Image.
