DT-4500 Series C- and Ku-Band Down Converters
MN/DT4500.IOM
Ethernet Interface Operation
Revision 2
7–16
7.5.2.2
Admin | SNMP
Sect
.
2 SNMP Interface
The Administrator must use this page to manage the SNMP (Simple Network
Management Protocol) settings.
Figure 7-10. ‘Admin | SNMP’ Page
Simple Network Management
– Use the drop-down list to set the Simple
Network Management operational setting as
Enabled
or
Disabled
.
The
Read
,
Write
, and
Trap Community Strings
can be any combination of
characters and a length of 0 to 20 characters:
•
The factory default
Read Community String
is
public
.
•
The factory default
Write Community String
is
private
.
•
The factory default
Trap Community String
is
comtech
.
SNMP Contact / SNMP Location / SNMP Name
– Enter this identity information
in any alphanumeric combination with a length of 0 to 20 characters.
Enable Authentication Trap
– Use the drop-down list to set Trap operation as
Enabled
or
Disabled
.
The Administrator can assign up to two
Trap
IP
addresses.
Trap Version
– Use the drop-down list to set the Trap Version as
SNMPv1
or
SNMPv2
.
