Comtech EF Data DT-4500 Series, Installation And Operation Manual

Page: 156 / 206

DT-4500 Series C- and Ku-Band Down Converters MN/DT4500.IOM
Serial Interface Operation Revision 2
8–10
8.7.1.2 Configuration Commands/Queries Quick Reference
Sect. Item Description Syntax
8.7.3.1 FRE Set Frequency <DEV/FRE_xxxxx.xxx{cr}
8.7.3.2 IFF Set IF Frequency <DEV/IFF_xxx{cr}
8.7.3.3 ATT Set Attenuation <DEV/ATT_xx.xx{cr}
8.7.3.4 CLD Select Cold Start Mode <DEV/CLD_xxx{cr}
8.7.3.5 MUT Mute/Unmute Converter <DEV/MUT_xxx{cr}
8.7.3.6 CMM Configure Mute Mode <DEV/CMM_xxx{cr}
8.7.3.7 CRM Set Redundant Mute Mode <DEV/CRM_xxx{cr}
8.7.3.8 AFR Set Fault Recovery Mode <DEV/AFR_xxx{cr}
8.7.3.9 PGM Set a Preset <DEV/PGM_nn_xxxxx.xxx_yy.yy{cr}
8.7.3.10 DPS Get All Presets <DEV/DPS_{cr}
8.7.3.11 CLR Clear a Preset <DEV/CLR_nn{cr}
8.7.3.12 SEL Select a Preset <DEV/SEL_nn{cr}
8.7.1.3 Redundancy Commands/Queries Quick Reference
Sect. Item Description Syntax
8.7.4.1 RED Set Redundancy Mode ON/OFF <DEV/RED_xxx{cr}
8.7.4.2 ICT Configure Redundant Converter <DEV/ICT_xx_yy{cr}
8.7.4.3 SAM Select Auto/Manual Mode <DEV/SAM_xx_y{cr}
8.7.4.4 FBU Forced Backup Mode <DEV/FBU_xx_y{cr}
8.7.1.4 Status Commands/Queries Quick Reference
Sect. Item Description Syntax
8.7.5.1 RCS Return Configuration Status <DEV/RCS_{cr}
8.7.5.2 RMS Return Maintenance Status <DEV/RMS_{cr}
8.7.5.3 RUS Return Utility Status <DEV/RUS_{cr}
8.7.5.4 RAS Return Alarm Status <DEV/RAS_{cr}
8.7.5.5 SAS Summary Alarm Status <DEV/SAS_{cr}
8.7.5.6 TSC Terminal Status Change <DEV/TSC_{cr}
8.7.5.7 PACRCS Packed Configuration Status <DEV/PACRCS_{cr}
8.7.5.8 PACRMS Packed Maintenance Status <DEV/PACRMS_{cr}
8.7.5.9 PACRUS Packed Utility Status <DEV/PACRUS_{cr}
8.7.5.10 PACRAS Packed Alarm Status <DEV/PACRAS_{cr}