DT-4500 Series C- and Ku-Band Down Converters
MN/DT4500.IOM
Firmware Update
Revision 2
5–6
•
To use Windows Explorer, see Section 5.2.4.2.
•
To use the Run and Browse windows, see Section 5.2.4.3.
•
To use Windows Command-line or the Command Prompt, see Section
1)
These examples specify drive letter “
c:”
. You can use any valid,
writable drive letter.
2)
Typical for many of the tasks that follow, type the command as
instructed and then press
Enter
.
After you make the temporary folder, proceed to Section 5.3 to download and
extract the firmware files.
5.2.4.1
Use Windows Desktop to Make a Folder
Do these steps:
1.
Right-click anywhere on the desktop to open the popup submenu.
2.
Select
New > Folder
to make the new, temporary folder on the desktop.
3.
Right-click on the new folder and then select
Rename
from the popup
submenu. Rename this folder to “temp” or some other convenient,
unused name.
