DT-4500 Series C- and Ku-Band Down Converters
MN/DT4500.IOM
Front Panel Operation
Revision 2
6–21
Otherwise, when pre-selects are programmed and available, entries display as
per this example:
#03 LOAD PROGRAM CLEAR ▲
03625.125 MHz 01.25 dB ▼
Use the
keys to browse through the stored pre-selects (
#01
through
#32
,
as
available). Then, use the
keys to select
LOAD
,
PROGRAM
, or
CLEAR
. Press
ENTER
.
6.2.6.1
(PRE-SELECTS:) LOAD
Load this pre-select
into converter? No Yes
LOAD recalls the stored pre-select from the active memory slot. It is functional
when pre-selects have previously been programmed into the unit using the
PROGRAM submenu. Use the
keys s to select
No
or
Yes
. Press
ENTER
.
6.2.6.2
(PRE-SELECTS:) PROGRAM
Program pre-select? #XX
04200.000 MHz 01.25 dB
PROGRAM saves a defined set of operating parameters into the available
memory slot as a PRE-SELECT.
On the top line, use the
keys to select the desired pre-select slot (from
#01
to
#32
).
On the bottom line, typical for the frequency and attenuation values, use the
keys to select a digit, and then use the
keys to change that digit. Press
ENTER
. The unit stores these edited values into the active pre-select slot, where
they may be recalled later via the
LOAD
submenu.
