DT-4500 Series C- and Ku-Band Down Converters
MN/DT4500.IOM
Front Panel Operation
Revision 2
6–14
6.2.3.3
(CONFIG:) REDUNDANCY Submenu
See
Appendix A. REDUNDANT SYSTEM OPERATION
for detailed
information about using the front panel menus for redundancy
configuration and operation.
This menu branch is functional in LOCAL MODE ONLY.
1:1 Redundancy is an optional feature for the DT-4500. If you attempt to select
any feature from this menu branch, and either Redundancy Configuration is
off
or the converter is the primary operating unit, the Redundancy menu branch
appears as follows:
Redunda
ncy: MODE
Otherwise:
Redundancy: MODE
Auto/Manual FORCE HSB
Use the
keys to select
MODE
,
Auto/Manual
,
FORCE
, or
HSB
(High Speed
Bus). Press
ENTER
.
6.2.3.3.1
(REDUNDANCY:) MODE
Redundancy Config = On
CONVERTER = #BU 1:01
On the top line, use the
keys to select the
Redundancy Config
setting, and
then use the
keys to toggle operation as
On
or
Off.
On the bottom line, when Redundancy Mode = On, use the
keys to navigate
to the
Converter Selection
setting, and then use the
keys to toggle the
converter operational preference as
#BU
(the backup down converter) or online
converter
#01
through
#12
.