Comtech EF Data DT-4500 Series, Installation And Operation Manual

Page: 155 / 206

DT-4500 Series C- and Ku-Band Down Converters MN/DT4500.IOM
Serial Interface Operation Revision 2
8–9
8.7 Remote Operation – Commands/Queries
8.7.1 Command/Query Quick References
8.7.1.1 Utility Commands/Queries Quick Reference
Sect. Item Description Syntax
8.7.2.1 TIM Set Time <DEV/TIM_hh:mm:ss{cr}
8.7.2.2 DAT Set Date <DEV/DAT_mm/dd/yy{cr}
8.7.2.3 TPE Set Time Protocol <DEV/TPE_x{cr}
8.7.2.4 TPS Set Time Protocol IP Address <DEV/TPS_xxx.xxx.xxx.xxx{cr}
8.7.2.5 LRS Set Local / Remote Status <DEV/LRS_x{cr}
8.7.2.6 MAC Get MAC Address <DEV/MAC_ {cr}
8.7.2.7 IPA Get IP Address <DEV/IPA_{cr}
8.7.2.8 IPG Get IP Gateway <DEV/IPG_{cr}
8.7.2.9 SPA Set Physical Address <DEV/SPA_xxx{cr}
8.7.2.10 SBR Set Baud Rate <DEV/SBR_xxxx{cr}
8.7.2.11 CON Set LCD Contrast <DEV/CON_xx{cr}
8.7.2.12 LCD Set LCD Brightness <DEV/LCD_xx{cr}
8.7.2.13 SSM Set Screen Saver Mode <DEV/SSM_x{cr}
8.7.2.14 SST Set Screen Saver Timeout <DEV/SST_xx{cr}
8.7.2.15 VFD Set VFD Brightness <DEV/VFD_xxx{cr}
8.7.2.16 SRO Set Reference Oscillator <DEV/SRO_xxx{cr}
8.7.2.17 SSA Set Converter Slope Adjustment <DEV/SSA_xxx{cr}
8.7.2.18 RET Get Equipment Type <DEV/RET_{cr}
8.7.2.19 PNM Get Part Number <DEV/PNM_{cr}
8.7.2.20 FRW Get Legacy Firmware Information <DEV/FRW_{cr}
8.7.2.21 FRM Get Firmware Information <DEV/FRM_{cr}
8.7.2.22 IMG Set Firmware Image <DEV/IMG_x{cr}
8.7.2.23 AID Set Application ID Message <DEV/AID_xxxxx...xxxxx{cr}
8.7.2.24 FRB Set Force Reboot <DEV/FRB_YES{cr}