DT-4500 Series C- and Ku-Band Down Converters
MN/DT4500.IOM
Front Panel Operation
Revision 2
6–25
(FIRMWARE:) INFO
IMAGE#1/#2
APP
App#X: FW-0000203x
X.X.X MM/DD/YY
(FIRMWARE:) INFO
IMAGE#1/#2
FPGA
FPGA#X: FW-0000204
X.X.X MM/DD/YY
6.2.7.3.2
(FIRMWARE:) SELECT
Current Active Image: #1
Next Reboot Image: #1 #2
Use this submenu to select the Current Active Firmware Image.
The
read-only
top line shows the
Current Active Image
. On the bottom line, use
the
keys to select
#1
or
#2
as the
Next Reboot Image
(i.e., the image that
will be active the next time the unit is rebooted). Press
ENTER
.
If the image that you select is already set as the designated Next Reboot Image,
this message displays:
THAT IMAGE IS ALREADY
CURRENT. NO CHANGE MADE.
You may repeat the task by instead selecting the alternate image.
6.2.7.4
(UTILITY:) AID (Application Identification String) Submenu
Edit AID Message?
No Yes
The Application Identification (AID) submenu allows you to create a customized
message. The AID may serve to identify the satellite, either transponder, beam,
