DT-4500 Series C- and Ku-Band Down Converters
MN/DT4500.IOM
Ethernet Interface Operation
Revision 2
7–2
7.1.1
Prerequisites
Before you proceed with Ethernet remote product management, make sure the
following is true:
•
The converter is operating with the latest version firmware files.
•
The User PC is running a terminal emulation program for operation of the
Telnet Interface.
•
The User PC is running a compatible web browser for operation of the
HTTP Interface.
•
The User PC is connected to the unit’s RJ-45 ‘Ethernet
’
port.
•
You have recorded the unit’s Management IP Address.
7.2
SNMP Interface
SNMP is an Internet-standard protocol for managing devices over IP networks. An
SNMP-managed network has three key components:
•
The managed device. This includes this unit.
•
The SNMP Agent. This software runs on the converter. The unit SNMP
Agent supports both SNMPv1 and SNMPv2.
•
The user-supplied Network Management System (NMS). This software
runs on the User PC.
7.2.1
Management Information Base (MIB) Files
An MIB file is used for SNMP remote management of a unique device, and
consist of a tree of nodes called Object Identifiers (OIDs). Each OID provides
remote management of a particular function. These MIB files should be compiled
in a user-supplied MIB Browser or SNMP Network Monitoring System server. In
these unit MIB file names, the letter ‘x’ represents the revision of the file.
7.2.1.1
ComtechEFData Root MIB File
•
FW-0000235x.mib
•
ComtechEFData MIB file gives the root tree for all Comtech EF Data
products and consists of only the following OID:
o
Name: comtechEFData
o
Type: MODULE-IDENTITY