Comtech EF Data CDM-425, Installation And Operation Manual

Page: 303 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Ethernet-based Remote Product Management 7–79 MN-CDM-425
Status | Modem Logs | Packet Processor
This nested page is accessible only to Admin users and when you install and
enable the optional IP Packet Processor card. See Sect. 7.5.3.1 for complete
details about using conditional access pages.
This page provides you with a scrollable window showing the optional IP Packet Processor’s
cumulative events, plus control over what information is displayed for IP Packet Processor
operations.
Figure 7-42. Status | Modem Logs | Packet Processor Page
Event Logging
•
Logging On/Off: Select event logging as On or Off .
•
Logging Level: Use the drop-down list to select the type of information displayed in the
log: Errors Only , Errors and Warnings , or All Information.
Click [Submit] once the desired settings have been entered in this section.
Clear Event Log
Scroll through the Event Log as needed, and then click [Clear Log] to wipe the log clean. The
table resets to a single event description – “ Event log cleared. ”