Comtech EF Data CDM-425, Installation And Operation Manual

Page: 526 / 744

CDM-425 Advanced Satellite Modem
Revision 0
ODU (Transceiver, BUC, LNB) Operation 10–36 MN-CDM-425
ODU: FSK-control

BUC

Advanced-FSK

LPOD (2LPODs

Online/Offline LPOD)

Information

Mask
Mask: LFRFPwr=Masked ERLD=Masked
FanSpd=Alarm LNBCD=Alarm LNB22V=Alarm
This screen displays the LPOD mask settings.
ODU: FSK-control

BUC

Advanced-FSK

LPOD (2LPODs

Online/Offline LPOD)

Information

Misc
Misc: AFR=Enabled Ref-Adjust=087
LowFwdPowerThreshold=00.00
This screen displays the Auto Fault Recovery state, the Internal 10MHz Reference setting, and
the Low Forward Power Threshold setting.
10.3.3.3.3.4.3.1.6 ODU: FSK-control

BUC

Advanced-FSK

LPOD (2LPODs

Online/Offline LPOD)

Redun
Redundancy-Switch-Mode=1:1 Red TX+RX
Force-Online=N Online-State=Offline(

)
Use the
◄ ►
arrow keys to select a setting, and then use the
▲▼ arrow keys to change that
setting:
Selection Setting
Redundancy-Switch-Mode Off, 1:1 Red Tx, 1:1 Red TX+RX, Manual.
Force-Online
Select Yes to force Offline unit to generate a redundant switchover.
Otherwise, select No.
Online-State Read-only. Displays status as Online or Offline.
Press ENTER when done.