Comtech EF Data CDM-425, Installation And Operation Manual

Page: 134 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Front Panel Operation 6–16 MN-CDM-425
Note that:
Setting Function
Nom-Pwr (Nominal Power) The output level reverts to the nominal power level set under Manual.
Max-Pwr (Maximum Power) The output level changes to the maximum permitted.
When in IP-ACM or V2-ACM mode:
CONFIG: Tx

Power

Mode

AUPC

Mode/range
AUPC-ACM Mode:Normal (/-Track)
Max Permitted Power Increase:3.0 dB
(

)
In all cases except when MEO (Medium Earth Orbit) is enabled, the mode is fixed at Normal. On
the bottom line, use the
▲▼ arrow keys to select the maximum permitted power increase:
Lower Limit Upper Limit Step size (Increment)
0.0 dB 9.9 dB 0.1 dB
CONFIG: Tx

Power

Mode

AUPC

Alarm-Action (IP-ACM or
V2-ACM Mode)
Tx-Alarm: Max Power (MaxPwr,MinMCod,None)
Rem Demod Unlock Act=NomPwr(Nom,Max,Hold)
On the top line – Use the
▲▼ arrow keys to select the alarm action that occurs if the
AUPC causes the maximum output power level to be reached. Valid settings are:
Setting Function
MaxPwr (Maximum Power) Generates alarm when maximum power is reached.
MinMCod (Minimum ModCod) Generates alarm if minimum ModCod is reached.
None Generates no alarm.