Comtech EF Data CDM-425, Installation And Operation Manual

Page: 106 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Updating Firmware 4–10 MN-CDM-425
b. Using Command-line:
•
Type “ cd c:\temp ” at the Command-line prompt to change to the
temporary directory created earlier using Command-line.
•
Type “ dir ” to list the files extracted to the temporary directory from the
downloaded archive file.
You have successfully downloaded the firmware files and they are now available for FTP
transfer to the CDM-425 Advanced Satellite Modem.
4.3.3 Perform the Ethernet FTP Upload Procedure
You may proceed with the firmware update procedure assuming that:
•
Your modem is connected to a user-supplied, Windows-based PC, and:
o
Your PC serial port is connected to the modem “Remote Control” port
with a standard user serial cable.
o
Your PC Ethernet port is connected to the modem “10/100 Ethernet”
port with a user-supplied hub, switch, or direct Ethernet cable
connection.
o
Your PC is running a terminal emulation program (for operation of the
modem Serial Interface) and a compatible Web browser (for operation
of the modem HTTP Interface).
•
Your modem firmware and Ethernet Traffic/Management IP Address has
been noted using either the modem Serial Interface or the modem HTTP
Interface ‘Admin | Firmware | Base Modem’ and ‘Configuration | LAN | IP’
pages, respectively.
•
The latest firmware files have been downloaded or otherwise received
from Comtech EF Data and are available on the User PC in an accessible
temporary folder.