Comtech EF Data CDM-425, Installation And Operation Manual

Page: 186 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Front Panel Operation 6–68 MN-CDM-425
6.2.1.13.3.9 CONFIG: IP

IP Setup: Stats
IPstats: Port x In Out (

)
Unicasts: 00000003 00000023 Clr:N
This screen displays IP traffic statistics for both the In (Ingress) and Out (Egress) directions.
Use the
◄ ►
arrow keys to navigate to the proper line, in this order:
On the top line – Use the
▲▼ arrow keys to select the bottom-line
IP Stats Type as WAN ,
Ports 1 through 4 , HDLC FPGA , or Management. (“ In ” and “ Out ” are column labels for the
bottom line parameters and are not selectable.)
On the bottom line – Use the
▲▼ arrow keys to view the desired statistical parameter.
Available statistics are:
IP Stats Type
(Use ▲▼ to select)
Available Statistics
(Use ◄ ► to navigate to the bottom line, and then ▲▼ to display a desired statistic)
WAN
HDLC Frames In / Out
Tx Dropped
Rx CRC Error
Port 1
Port 2
Port 3
Port 4
HDLC FPGA
Management
Unicasts 511 Octets *Indicates In only
**Indicates Out only
Broadcasts 1023 Octets
Pause Max Octets
Multicasts Jabber*
FCS Error Oversize*
Align Error* Discards
Good Octets Filtered*
Bad Octets* Collisions**
Undersize Multiple**
Fragments* Single**
64 Octets Deferred**
127 Octets Late**
255 Octets Excessive**
Clear the IP Statistics accumulators by using the
◄ ►
arrow keys to move the cursor to Clr:N ;
then, use the
▲▼ arrow keys to select
Clr:Y. Press ENTER .